dodge journey dead key fob

Dodge Journey: Start The Engine With Dead Key Fob

Key fobs are beneficial as they allow you to lock and unlock your Dodge Journey with the click of a button. However, if the battery goes dead, how do you start your vehicle? No worries, we got you covered. Follow these steps below to enter and start your Dodge Journey with a dead key fob.

2020 Models

2011 – 2019 models.

• Turn the fob over to reveal the latch located at the TOP BACK of the fob.
• Use the key to UNLOCK the vehicle door.
• Place the key fob on the START button, PUSH in, and press the BRAKE to start the vehicle.

*Although the battery in the fob is dead, the vehicle will, in fact, recognize the fob.

• The  fob battery is low or dead if the engine does not start when pushing the button.
• Place the  nose side of the Fob (opposite end from the emergency key) against the Start/Stop  button.
• Push the  Start/Stop button.

**NOTE : If you are unable to enter and start the vehicle with the dead key fob on the first try, REPEAT the steps. If you are still unsuccessful, contact the dealership for assistance or consult your vehicle user’s manual. 

Related posts:

Leave a comment cancel reply.

Dodge Journey Key Not Detected: Causes & Fixes

The “Key Not Detected” on your Dodge Journey is a warning sign often associated with issues with the key fob. It will normally pop up when the driver attempts to switch on the vehicle, and the computer system cannot pick up a signal from the key fob. 

The warning message will come if any factor disrupts the communication between the key fob and the ECM. Once the push-start button is pressed and the key’s signal is not detected, the vehicle will not come, and the error will come up. Many factors could stop the vehicle from picking up signals from the key fob. These factors include dead key battery, damaged receiver module, dead car battery, and more. 

We will examine what a “Key Not Detected” means in a Dodge Journey. Also, explore the causes of this issue and how it could be fixed.

Meaning of Dodge Journey Key Not Detected

A Dodge Journey “Key Not Detected” is a warning message showing that the vehicle cannot communicate with the key fob, especially when you try to start the car.

What is a key fob? If you are unfamiliar with the term, it is a device that opens and unlocks the vehicle. Its most important function is its ability to start the car through the push-to-start function. 

The Push-to-start function in the Dodge Journey uses low-frequency communication. Once the start button is pressed, the engine computer picks up a signal from the key fob, which should be in the car at the time. 

Once the computer picks up the signal, the ECM sends power to the engine for ignition.

Sometimes, the computer system does not pick up any signal from the key fob. Check the key fob and ensure it is in the vehicle; if it is, there is an issue with the device. 

Without the ECM picking up signals from the key fob, the engine will not start. 

Causes of Dodge Journey Key Not Detected 

Many factors could cause a “Key Not Detected” warning message on your Dodge Journey dashboard. In most cases, it is an issue with the key fob. However, other issues could be responsible for the warning message, like damaged receiver modules. 

Below are some of the major causes of “key Not Detected.”

Dead key fob battery 

A major cause of the warning message “key Not Detected” is a dead battery. The Key fob uses a small button-like battery that powers it; unfortunately, it is not designed to last forever. 

The key fob battery will weaken and must be replaced at a certain point. You will notice the need to change the battery when the range of the key reduces. Now, you must draw closer to the car to open or close the door or press the button multiple times. 

You could also get a notification of the low battery on the dashboard of your Dodge Journey. 

Receiver module issues or interference 

Another cause of the “key Not Detected” warning message is when the receiver module is not working as it should. 

What is the receiver module? A device inside the vehicle receives signals from the key fob. It then sends signals to other components depending on whether to open or lock the door or trunk and start the engine. 

Sometimes, the signal from the key fob may be interfered with by other radio waves that do not allow the module to pick up the right signals. In other cases, the module might be damaged and unable to pick up any frequency. 

Water damage to the key fob 

If you expose your key fob to water, it could cause serious damage. You need to understand that the key is an electrical device, and it is not designed to be waterproof and will get damaged if exposed to a certain amount of water. 

Dead vehicle battery 

A dead Dodge Journey battery will stop the receiver module from picking up the key fob signal. The module receives power from the battery to function. Once there is no power flowing to the module, it will not work. 

Until the battery is charged, you cannot access and switch on the vehicle using the keyfob. 

Worn-out key fob 

The key fob will get worn out after long usage due to exposure to dirt, moisture, and other working conditions. 

You will notice that the key fob is worn when the buttons are harder to press, and it takes longer for the vehicle to respond to the key’s command. 

Also, the battery contact may become worn out, loose, or corroded due to oxidation, vibration, and other factors. This will have the same effect as having a dead battery. 

How to fix Dodge Journey Key Not Detected

Once you realize the Dodge Journey “Key Not Detected” warning message, you need first to figure out what the cause of the problem is. You can do this by inspecting all the vehicle components that could be the source of the issue. 

Below are ways to fix a Dodge Journey “Key Not Detected.”

Replace the key fob battery 

When the battery of your Dodge Journey key fob is dead, you need to replace it immediately. To do this, follow the steps below. 

• Find the small notch at the side of the key fob and insert a screwdriver or any other tool that can fit in. 
• Slowly pry open the case and separate it into two. 
• Find buttons like batteries and take note of how they were placed. 
• Insert the new batteries the same way the old ones were placed. 
• Snap the separated key fob back together and test the key. 

Replace key fob 

In case of water damage or extreme wear conditions, you may need a new key fob compatible with your vehicle. You can get this in an authorized Dodge dealership. 

Charge or replace car battery 

If you are faced with a dead battery car battery, the easy fix is to charge the battery. Sometimes, the issue might not be a dead battery; it could be that the terminals are corroded. In this case, you may need to have them clean. Make a baking soda and water mixture, using the mixture and a rag to clean the battery. 

Fix module issue 

To fix the receiver module, you need first to locate it. The module is under that dashboard, just behind the glove box. Once located, check the connections, wiring antenna, and other components. 

Go ahead and replace damaged parts of the module if you can. A professional should do issues like software malfunction. 

Final Thought!

If you are faced with a “Key Not Detected”, it is important that you have the issue solved fast before the key fob becomes completely nonfunctional. Fortunately, problems with the key fob can easily be fixed, and you may not require professional help. Also, it will not cost much to have the issue fixed, even if you have to replace the key. 

I'm Edmond Davis, an automotive expert with years of experience in vehicle repair, performance, and safety. I graduated from the University of Michigan with a degree in Automotive Engineering and have worked with major companies like Ford, GM, and Chrysler. I'm a trusted source of information for anyone looking to learn more about cars or improve their driving experience.

View all posts

Related Posts

Dodge Ram 1500 Mass Air Flow Sensor Location: Find It Easily

Dodge Ram Ground Strap Locations: Easy Guide to Find Them

Dodge Ram Volume Knob Not Working: Quick Troubleshooting Guide

3 Causes of Dodge Ram Shift Solenoid Problems

7 Causes of Dodge Charger Screen Not Turning On

3 Causes of Dodge Ram Wheel Speed Sensor Problems

Dodge Ram 1500 Fuel Filter Location: A Handy Guide

Dodge Ram 1500 Starter Solenoid Location: Quick Guide

Dodge Ram 1500 Front Parking Sensor Malfunction: Quick Fix Guide

5 Common Dodge Ram 1500 PCM Problems

9 Common Dodge Ram Air Conditioning Problems & How to Fix

Dodge Ram Throttle Position Sensor Reset: Quick Guide

5 Causes of Exhaust System Services Required See Dealer

Service Engine Emissions System 25 Derate: Causes & Fixes

© 2024 Daily Car Tips

Home » Troubleshooting » Dodge Journey won’t start – causes and how to fix it

Dodge Journey won’t start – causes and how to fix it

Dodge Journey is a reliable road companion, but its a machine with hundreds of interconnected parts, and like any other machine it sometimes fail to deliver normal operation. In this article we go through most common causes of Journey breakdown and how you can fix the problem.

The most common causes that hinders normal starting operation of your Journey are dead 12v battery, corrosion on battery terminals, and dead key fob battery. However, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error, or any fault in the electrical system can also cause your vehicle not to start.

1. Weak Battery

If your Journey’s engine won’t crank or cranks very slowly, then the most likely culprit is weak or dead 12v battery. Investigating more closely and doing a battery voltage test will clarify whether the starting problem is due to the battery. A test can be done to measure the voltage between the battery poles, check the acid level and assess the condition of the starter battery.

If a new car battery has been installed, the battery may not have yet reached its full capacity. There is nothing to worry about. A new battery only develops its full capacity over time.

Test 12v battery

The voltage of the battery on your Dodge Journey can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values ​​of approx. 12 to 13 volts. Values ​​above 14 or below 11.5 volts require an expert assessment of the condition of the car battery. Because the battery may have a defect with these measured values ​​and must be replaced.

Jump start Dodge Journey

If dead battery is the reason for the breakdown of your Journey, you can easily jump start it using jumper cables and a healthy battery from another vehicle, or using a battery booster if available.

First connect red cable to the positive terminal of your Journey’s dead battery, then to the positive terminal of donor battery. Next connect black cable to the negative terminal of donor battery, then to the bare metal in the engine bay of your Journey. Start the donor vehicle and then your Journey. Remove the cables in reverse order.

2. Corrosion on battery

Corrosion on the contacts of your car battery leads to loss of contact and reduced current flow, which means that your engine can no longer start properly.

To know if your Journey’s starting problems are from dirty battery contacts, you need to investigate them. If you lift the rubber covers over the two battery terminals, you can check the terminals for corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you do not have to replace the battery, just clean it.

Clean battery corrosion

To clean the battery on your Dodge Journey, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers. We advise against using metal pliers, but if you use them, you must make sure that you do not touch any other parts of the body. Next you can unplug the red positive pole cable. Once the battery has been removed from the circuit, you can start cleaning the corroded battery. After cleaning, reconnect the terminals.

3. Weak key fob battery

If your Journey has push start/stop button, then its possible that your vehicle may not start due to weak key fob battery. Don’t worry, you can still start your vehicle – the battery is only used to send the signal for locking/unlocking. If the key fob battery is empty, the door no longer locks or unlocks at the push of a button. The doors must then be opened manually. The immobilizer is controlled by a passive transponder. Passive means, among other things, that the transponder in the key does not need its own power source.

How to start Dodge Journey with dead key fob battery

If you have a model of Journey which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle.

Tip: You can try starting your Journey with its second key. It will also rule out any other problem with the first key, for example, water damage.

4. Broken starter motor

A starter is a motor for starting the engine of your Journey. The average life of a starter motor is about 100,000 to 150,000 miles, and the life will be shortened if the engine is started more frequently. In any case, since the starter motor also has a limited life, it will break down after using the car for a long time, and if the starter motor breaks down, the engine will not start.

Symptom: When you turn the key to start the engine of your Journey, you will hear a clicking sound, which is the sound of a bad starter motor. And if the starter motor does not work with a healthy battery, suspect a malfunction of the starter.

If the starter fails, it usually needs to be replaced with a new one.

Temporary fix for starter

If the engine does not start due to the starter, the engine may start if you turn the key while hitting the starter motor with something like a stick or metal tool. This workaround is effective when the parts inside the starter are stuck together or the gears are slightly out of alignment.

However, it is possible that the starter is nearing the end of its life, so it is recommended that you have it inspected at a dealer or maintenance shop.

5. Defective alternator

An alternator is a generator that produces electricity. If your Journey’s alternator fails, it will not be able to produce electricity and the battery will not be able to charge. Therefore, even if you think that the cause of the engine not starting is a battery failure and replace the battery, the battery will soon run out and the engine will not start.

Alternators rarely break down. In particular, modern cars have improved performance, so it is said that they will last 200,000 to 300,000 miles. Still, it can break down depending on how you use it, and in the case of a used car, the alternator may be quite old. Don’t let your guard down.

If the alternator breaks down, it must be replaced with a new alternator.

6. Clogged fuel filter

The fuel filter of your Journey does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure. To a certain extent this doesn’t matter, but if the fuel filter is too dirty, the engine will no longer perform at full capacity and in some instance may not start at all. Cleaning is not possible, you can only change the filter.

7. Fuel pump failure

If your Journey’s fuel pump fails, then the engine won’t start. The pump normally ensures that the necessary amount of fuel is passed from the tank to the injection system of the engine with sufficient pressure.

Before your fuel pump stops working, it usually becomes noticeable: if your car’s engine breaks down from time to time, the car is difficult to start, the engine jerks a little or the engine performance drops, you should have your pump checked.

Wear or contamination of the pump can be the reason for this. If the pump is leaking, a power contact is broken, a line or a pump lever is broken, the fuel pump is usually also noticeable before failure. You can have a defective fuel pump replaced in your workshop.

8. Blown fuse

In rare cases, a blown fuse could also be the culprit in the breakdown of your Journey. Check all fuses in the fuse box essential for starting the engine. But, be careful when lending a hand yourself to the fuse box! The box is under power and repairs or tests should always be done in a workshop.

9. Defective spark plugs

Without functioning spark plugs, the engine will not start. The spark plugs themselves are often not affected by a defect. Instead, plug connections on the ignition system come loose. If only one plug is actually loose, you can fix the problem yourself on site. If a spark plug has failed, it must be replaced in the workshop.

10. Rodent damage

Rodent damage can be another reason why your Dodge Journey won’t start. The animals crawl under the vehicle and bite through cables and wires. In principle, this can affect all vehicle systems such as the fuel supply, the oil supply or the power supply.

The rodent damage can usually be seen quickly by looking into the engine compartment. The damage caused by the rodent bite can be repaired in the workshop. Be prepared for relatively high costs here.

11. Engine failure

Although very rare, but it can also be the cause of the breakdown of your Journey. If a vehicle has an engine failure, then nothing works anymore. It is not uncommon for the driver of a vehicle to be responsible for such damage. Typical causes include tearing of the timing belt, incorrect fueling, insufficient oil, hydrolock, overheating of the engine, or continuous driving in an excessive speed range.

Only an experienced mechanic can diagnose engine failure in a workshop.

Use OBD2 scanner for diagnosis

Since Dodge Journey is equipped with on-board diagnostics (OBD), a fault diagnosis can provide initial indications of where the malfunction is located.

To begin troubleshooting, you must first connect the diagnostic tool to your Journey. The OBDII connector is usually located under the dashboard. With the wire connected, you should turn the ignition on. But be careful not to start the engine. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be falsified. In addition to the vehicle manufacturer and model, you usually also have to type in the engine and vehicle ID number. For exact troubleshooting, always check whether the information is correct.

There are many reasons why your Journey may not start. When looking for the trigger, you should always start with the most obvious cause, the empty battery.

In any case, it is advisable for laypersons to call a breakdown service or a workshop. In the event of a defect, the latter can directly initiate the repair.

My Dodge Journey will not start after driving a short time, and then stopping about 20 minutes, then try to start, press lock unlock wait 10 minutes, car will then start every time.

This is a problem I am having with my Dodge Journey as well. I haven’t had this SUV 3 years and I am still paying on it.

My 2017 Dodge Journey ran fine in the morning yesterday, was totally dead last night – no locks, no dash lights, no power button. Long story short – disconnected + positive cable under hood to reset computer. Put cables back on after 10 min wait – got feeble spark while attaching wires. Entered car, found 4-way flashers indicating on dash. Button was accidentally depressed after morning drive. Charged battery for 1 hour with battery charger. Started fine, but needed to be driven extensively to fully charge 69-month old battery. Buying new battery tomorrow.

My dodge journey 2014 is not starting. It was stripped for overheating but now after the reassemble it’s not starting, VIN initialising and press clutch to start engine are showing on the clock

• How double locking system works in Toyota Fortuner
• Ford Puma steering wheel vibration causes and diagnosis
• Chevy TrailBlazer won’t start – causes and how to fix it
• Chevy Impala AC smells bad – causes and diagnosis
• VW Crafter burning smell causes and how to fix it
• Chevy HHR bad alternator symptoms, how to check voltage
• Mitsubishi Pajero Sport makes grinding noise when starting – common causes
• Acura ILX Bluetooth not working – causes and how to fix it
• Toyota Aygo AC not working – causes and how to fix it
• Ford Fusion AC blower motor not working – causes and diagnosis
• Mazda6 bad wheel bearings symptoms, causes and diagnosis
• Saab 9-7X AC smells bad – causes and diagnosis
• Ford F-350 Super Duty dashboard lights flicker and won’t start – causes and how to fix it
• Skoda Rapid pulls to the right when driving
• Mercedes-Benz E-Class makes grinding noise when starting – common causes
• Ferrari GTC4Lusso key fob won’t lock or unlock the doors
• Citroen C5 Aircross slow acceleration causes and how to fix it
• Porsche 911 bad ignition coils symptoms, causes, and diagnosis
• Mercedes-Benz GLE makes grinding noise when starting – common causes
• Bentley Bentayga bad mass air flow sensor (MAF) symptoms and causes

Dodge Journey Key Fob

Disclosure This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

As the proud owner of a Dodge Journey, you understand the significance of a functional key fob. This small device allows you to easily unlock and secure your vehicle and start the engine without using a key.

As with all electronic devices, your key fob’s battery will ultimately lose its charge and require replacement.

This article will guide you on how to replace the battery in the key fob for your Dodge Journey. We will provide detailed instructions to assist you in replacing the battery efficiently and swiftly.

This article is for you whether you are experiencing symptoms of a diminished battery or simply want to be prepared for the inevitable. Let’s get underway!

Table of Contents

Which Battery Does Dodge Journey Key Fob Use?

The Dodge Journey key fob uses the CR2032 battery like most other car models. The CR2032 battery is a lithium-oxide battery that is coin or button-shaped. It has a diameter of 20mm and a thickness of 3.2 mm. It has a voltage of 3.0 volts.

It is a primary non-rechargeable battery that has a typical weight of 3.0 grams. The lithium battery can be operated in varying temperature levels from as low as -30 0 C to as high as 60 0 C without any performance issues.

Reasons for Changing the Battery

The battery in your Dodge Journey key fob provides power and enables the device to function. The battery will eventually lose its charge and must be replaced.

There are multiple instances in which you may need to replace the battery in your key device.

• The battery may have merely reached the end of its useful life. The battery in your key fob, like all batteries, has a limited life cycle and will eventually need to be replaced.
• The battery may have been depleted as a result of prolonged periods of inactivity. If you haven’t used your key fob in a while, the battery may be dead, even if it wasn’t extensively used.

Signs of a weak or dead battery in your key fob

The operation range of the battery is reduced greatly reduced. You have to be very near the car for the key fob to work. This shows the signal from the key fob to the car is very weak due to low battery power.

• The buttons have to be pressed repeatedly for them to work. One press is not responsive
• The key fob works erratically. One minute it is working well; the next, it is not.
• The key fob becomes completely responsive.

Steps to Change the Battery

Now that you understand the reasons for changing the battery in your Dodge Journey key fob, let’s go over the steps to replace it.

Step 1: Remove the key from the fob. There’s a small metal button located above the key part of your key fob. Press the button and pull out the key.

Step 2: Open the fob. Using a small screwdriver or another flat object, insert it into the little slot that the key fits into and pop open the fob.

Step 3: Remove the green circuit board. Carefully remove the circuit board from the fob, being sure not to damage any of the components.

Step 4: Replace the battery. Take note of the kind of battery you need to replace. Most Dodge Journey key fobs require a CR 2032 3V battery , which can be found at most electronic stores or ordered online. Be sure to handle the new battery with care and avoid touching the contacts.

Step 5: Put the fob back together and place the key back in the fob. Make sure everything is securely in place and test the key fob to ensure it is working properly.

It’s important to note that when handling the circuit board, you should be gentle and avoid applying too much pressure. The circuit board is delicate and can be easily damaged if mishandled.

What to Do If You Need a Full Dodge Journey Key Fob Replacement

In some cases, simply changing the battery in your Dodge Journey key fob may not be enough. If you have lost or accidentally destroyed your key fob, you may need to replace the entire device.

Fortunately, the parts department at your local Dodge Journey dealership can help.

A replacement key fob for Dodge Journey as well as the key fob battery can be bought from dealers or online retailers like Amazon. The advantage of buying online is that the cost is relatively cheaper than getting it from the dealer.

However, buying from the dealer has the advantage of having the emergency key cut and the key fob programmed to work in your Dodge Journey car. A lock locksmith can cut the key at a minimal fee.

You do not need any specialty tools to change the battery in the Dodge Journey key fob.

Having a functioning key fob is essential for any Dodge Journey owner. Not only does it make unlocking and locking your car easier, but it also allows you to start your engine without having to insert a key.

The battery in your key fob will eventually need to be replaced, and in some cases, you may need a full key fob replacement.

By following the steps outlined in this article, you can easily change the battery in your Dodge Journey key fob and avoid the inconvenience of a dead or weak battery.

Check out other Dodge Key Fobs

Check Out The Following Also:

• How To Change Battery In Hummer Key Fob
• How To Change Battery In KIA Seltos Key Fob
• Toyota Highlander Key Fob Battery
• BMW 2 Series Key Fob

• Remember me Not recommended on shared computers

Forgot your password?

• Accessories, Modifications

Key info and Reprogramming Key Fobs

By RAV October 23, 2009 in Accessories, Modifications

• Reply to this topic
• Start new topic

Recommended Posts

I have a 2010 Journey.

We got two RKE (Remote Keyless Entry) fobs with the little keys inside to unlock the driver's door only.

Today I had a locksmith cut a backup key for $3 and it works without issue.

I'm going to hide this outside the car.

I have copies of the 2009 and 2010 owners manuals (electronic). The 2009 one discusses how to program additional fobs. The 2010 states "dealer only".

I took a chance and ordered a used FOB, same FCC ID #, from Ebay.

Manuals say a key can not be reprogrammed once they are used on a vehicle.

Is this true? Can I somehow clear the internal programming on the "used" FOB and program it to my car using the 2 other (good) fobs?

Are all of these "warnings" just a way to point customers to the dealer so they can rape us with excessive charges?

Link to comment

Share on other sites, email4walker.

I have a 2010 Journey. We got two RKE (Remote Keyless Entry) fobs with the little keys inside to unlock the driver's door only. Today I had a locksmith cut a backup key for $3 and it works without issue. I'm going to hide this outside the car. I have copies of the 2009 and 2010 owners manuals (electronic). The 2009 one discusses how to program additional fobs. The 2010 states "dealer only". I took a chance and ordered a used FOB, same FCC ID #, from Ebay. Manuals say a key can not be reprogrammed once they are used on a vehicle. Is this true? Can I somehow clear the internal programming on the "used" FOB and program it to my car using the 2 other (good) fobs? Are all of these "warnings" just a way to point customers to the dealer so they can rape us with excessive charges?

How much is the dealer charging to do it for you?

I'm hoping I will be able to accomplish this without any dealer envolvement.

Here is the problem with your idea. The journey is useing Mercedes Technology with the key fobs. Mercedes Technology is almost identical to the BMW technology in the way it works.

That being said, you shoudl check with the dealer to see how many FOB's you can have programed to 1 car. BMW and MBZ only allow you to have 2 FOBS programed to 1 car at any given time. SO if you program another in, it will effectivly "Bump" one of your keys out of sequence and that one key will not start or lock/unlock the doors. They use this as a securty messue as to not have too many active keys out there at one time....SO if you lose a key and buy another fob, they would bump the lost fob out of the system so that a theif cannot steal the car.

the second half of your question, is no, you cannot use a used FOB from another car. It goes back to MBZ and BMW technology. All fobs are programed from factory to your vehicles VIN# when you order. The WIN has the vin# embeded in its programing. IF the vin's do not match, the FOB will not initialize and work in your car.

Again its a security issue.....or any cheap mechanic can get a fob, program it to your car, and have someone steal your car.

Here is the problem with your idea. The journey is useing Mercedes Technology with the key fobs. Mercedes Technology is almost identical to the BMW technology in the way it works. That being said, you shoudl check with the dealer to see how many FOB's you can have programed to 1 car. BMW and MBZ only allow you to have 2 FOBS programed to 1 car at any given time. SO if you program another in, it will effectivly "Bump" one of your keys out of sequence and that one key will not start or lock/unlock the doors. They use this as a securty messue as to not have too many active keys out there at one time....SO if you lose a key and buy another fob, they would bump the lost fob out of the system so that a theif cannot steal the car. the second half of your question, is no, you cannot use a used FOB from another car. It goes back to MBZ and BMW technology. All fobs are programed from factory to your vehicles VIN# when you order. The WIN has the vin# embeded in its programing. IF the vin's do not match, the FOB will not initialize and work in your car. Again its a security issue.....or any cheap mechanic can get a fob, program it to your car, and have someone steal your car.

Thank you for your insight.

Note that in the 2009 manual, there is a large amount of information on the key process on page 17 including duplication and the fact that you can have up to 8 keys:

I do not believe there are any changes in the 2010 vehicles in this area (no hardware changes) so the process should be the same.

I need to better understand the "new key" vs "previously used key" issue better to know if I can update my used key or how I can clear the memory.

• 1 year later...

Thank you for your insight. Note that in the 2009 manual, there is a large amount of information on the key process on page 17 including duplication and the fact that you can have up to 8 keys: "Replacement Keys NOTE: Only RKE transmitters that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a transmitter is programmed to a vehicle, it cannot be programmed to any other vehicle. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). Keep the PIN in a secure location. This number is required for authorized dealer replacement of RKE transmitters. Duplication of RKE transmitters may be performed at an authorized dealer or by using the Customer Key Programming procedure This procedure consists of programming a blank transmitter to the vehicle electronics. A blank transmitter is one that has never been programmed. NOTE: When having the Sentry Key Immobilizer system serviced, bring all vehicle RKE transmitters with you to the authorized dealer. Customer Key Programming If you have two valid RKE transmitters with integrated keys, you can program new transmitters 1. Insert the first valid integrated key into the ignition switch and turn the ignition switch to the ON position for at least three seconds, but no longer than 15 seconds. Turn the ignition switch to the LOCK position and remove the first key. 2. Insert the second valid integrated key and turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound and the Vehicle Security Alarm Indicator Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. 3. Insert a blank integrated key into the ignition switch and turn the ignition switch to the ON position within 60 seconds. After 10 seconds, a single chime will sound and the Vehicle Security Alarm Indicator Light will stop The new integrated key is programmed. The RKE transmitter will also be programmed during this procedure. Repeat this procedure to program up to eight keys. If you do not have a programmed RKE transmitter with integrated key, contact your authorized dealer for details. NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the system’s memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be reprogrammed. All vehicle keys must be taken to an authorized dealer at the time of service to be reprogrammed." I do not believe there are any changes in the 2010 vehicles in this area (no hardware changes) so the process should be the same. I need to better understand the "new key" vs "previously used key" issue better to know if I can update my used key or how I can clear the memory.

I have a 2010 Journey. I bought 2 keys off of ebay that were OEM new and was able to program them using the method described in the 2009 owners manual. The dealer wanted $45 to do program one and $280 for a new one. I payed $89 for the two on Ebay and programed them myself. You have to make sure the part number matches your key. I tried programing one from another source (with no part number on it) and the keyfob part programed but the remote door lock part wouldn't program. You are suppose to be able to have 8 key fobs total.

• 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

×   Pasted as rich text.    Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.    Display as a link instead

×   Your previous content has been restored.    Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

• Insert image from URL
• Submit Reply
• Existing user? Sign In

More Forum Apps

• Online Users
• Leaderboard

|| Forum Activity ||

• All Activity
• Create New...

• 1-888-511-3595
• Chrysler Parts
• Dodge Parts
• Accessories
• Login/Register
• Track Order
• Help Center

Genuine Dodge Journey Car Key

Enter your vehicle info to find more parts and verify fitment.

• Select Vehicle by VIN
• Select Vehicle by Model

25 Car Keys found

Dodge Journey Key-Blank

• Other Name : Key Blank Transmitter; Key
• Replaces : 68145590AA, 68156409AA, 68085673AA, 68085680AA
• 2017-2020 Dodge Journey | Crossroad AWD, Crossroad FWD, GT AWD, GT FWD, SE AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
• 2011-2015 Dodge Journey | Crew AWD, Crew FWD, Crossroad AWD, Crossroad FWD, Express FWD, LUX AWD, LUX FWD, Limited AWD, Limited FWD, Mainstreet AWD, Mainstreet FWD, R/T AWD, R/T FWD, R/T Rallye AWD, SE AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• Other Name : Key Blank Transmitter; Key, Transmitter
• Replaces : 68029829AA
• 2009-2010 Dodge Journey | Crew AWD, Crew FWD, Heat AWD, Heat FWD, Hero AWD, Hero FWD, R/T AWD, R/T FWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L

• Other Name : Key Blank; Key
• 2009-2011 Dodge Journey | Crew AWD, Crew FWD, Express FWD, Heat AWD, Heat FWD, Hero AWD, Hero FWD, LUX AWD, LUX FWD, Mainstreet AWD, Mainstreet FWD, R/T AWD, R/T FWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L

• Other Name : Key Blank
• Replaced by : 68029829AB
• 2009 Dodge Journey | R/T AWD, R/T FWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L

Dodge Journey TRANSMTR-Integrated Key Fob

• Other Name : Transmitter Integrated Key Fob
• Replaced by : 56046707AG
• 2010 Dodge Journey | Crew AWD, Crew FWD, Heat AWD, Heat FWD, Hero AWD, Hero FWD, R/T AWD, R/T FWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.5L

• Replaced by : 5026378AN

Dodge Journey Key Fob-Integrated Key Fob

• Replaced by : 68066350AG
• 2012 Dodge Journey | Crew AWD, Crew FWD, LUX AWD, LUX FWD, R/T AWD, R/T FWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• 2013 Dodge Journey | Crew AWD, Crew FWD, R/T FWD, R/T Rallye AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• 2011 Dodge Journey | Crew AWD, Crew FWD, Express FWD, LUX AWD, LUX FWD, Mainstreet AWD, Mainstreet FWD, R/T AWD, R/T FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• 2014-2015 Dodge Journey | Crossroad AWD, Crossroad FWD, Limited AWD, Limited FWD, R/T AWD, R/T FWD, R/T Rallye AWD, SE AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• Other Name : Transmitter Integrated Key Fob; Transmitter
• Replaces : 68066349AC, 68066349AE, 68066349AD, 68066349AA, 68066349AB, 68066349AF
• 2011-2020 Dodge Journey | Crew AWD, Crew FWD, Crossroad AWD, Crossroad FWD, Express FWD, GT AWD, GT FWD, LUX AWD, LUX FWD, Limited AWD, Limited FWD, Mainstreet AWD, Mainstreet FWD, R/T AWD, R/T FWD, R/T Rallye AWD, SE AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• Replaced by : 68200221AA
• 2011-2013 Dodge Journey | Crew AWD, Crew FWD, Express FWD, LUX AWD, LUX FWD, Mainstreet AWD, Mainstreet FWD, R/T AWD, R/T FWD, R/T Rallye AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• Replaced by : 68066349AG

• Other Name : Transmitter Kit Integrated Key Fob
• Replaced by : 5026378AF

• 2017-2019 Dodge Journey | Crossroad AWD, Crossroad FWD, GT AWD, GT FWD, SE AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L
• 2012-2015 Dodge Journey | Crew AWD, Crew FWD, Crossroad AWD, Crossroad FWD, LUX AWD, LUX FWD, Limited AWD, Limited FWD, R/T AWD, R/T FWD, R/T Rallye AWD, SE AWD, SE FWD, SXT AWD, SXT FWD | 4 Cyl 2.4L, 6 Cyl 3.6L

• Replaces : 68066350AD, 68066350AF, 68066350AA, 68066350AB, 68066350AC, 68066350AE

Related Dodge Journey Parts

Browse by Year

Dodge Journey: Key Stuck in Ignition → Diagnosis

There are a few easy to fix reasons why your Dodge Journey’s key might get stuck in the ignition.  It’s often easy to unstick the key.  Whatever you do, don’t start trying to rip it out of the ignition.  That can cause bigger problems.

This article is written with the assumption that your key is stuck right now and that you are looking to get it out.

There might be several factors contributing to your key getting stuck, including the ignition lock itself, a worn-out key, or even a misaligned transmission.

By diagnosing the root cause, you can determine the most effective way to address the issue and prevent it from recurring. In addition, knowing when to call a professional for assistance will save you time and effort, ensuring your vehicle remains secure and functional.

Key Takeaways

• Understand the common reasons behind a stuck key in your Dodge Journey’s ignition
• Learn practical solutions and preventive measures to avoid this issue in the future
• Know when to seek professional help for a stuck key to ensure your vehicle’s security

Causes of a Stuck Key

One common cause of a stuck key in the Dodge Journey is the key wearing out over time.

The teeth on the key may become worn, causing the key to lose its proper alignment inside the ignition cylinder. Also, the key can bend, which will cause it to bind in the cylinder.

Excessive usage or rough handling can weaken the key, increasing the likelihood of it getting stuck. Inspect your key for signs of wear and consider replacing it if necessary.

Damaged Ignition Cylinder

Another possible cause is a damaged ignition cylinder. The ignition cylinder is a component that facilitates the engagement and disengagement of the vehicle’s engine.

If your Journey’s key is difficult to insert or remove, or if you struggle to turn the key, it may be a sign that the ignition cylinder is damaged. In such cases, seek the assistance of a professional mechanic to diagnose and repair the issue.

Steering Wheel Lock

Lastly, the steering wheel lock is a safety feature designed to prevent the vehicle from being moved without the key.

When the steering wheel is locked, it might apply pressure on the ignition cylinder, making it difficult to release the key. If you encounter this issue, try gently turning the steering wheel from side to side while attempting to remove the key.

This process should ease the tension on the ignition cylinder and allow the key to be released.

Solutions to Remove a Stuck Key

Jiggling the key.

Sometimes, a simple solution to a stuck key is gently jiggling it. Apply slight pressure to the key while carefully moving it back and forth in the ignition. Be cautious not to forcefully twist or bend the key, as this can cause it to break.

Adjusting the Steering Wheel

Your Dodge Journey may be equipped with a steering lock system. In some cases, a misaligned steering wheel can bind the ignition switch, causing the key to be stuck. Follow these steps to unlock your steering wheel:

• Apply light pressure to the key : While keeping light pressure on the key in the ignition (as if you’re trying to turn it), simultaneously…
• Move the steering wheel : Gently turn the steering wheel left and right until you find a point where it unlocks and frees the key.

It may require a few attempts, but this process can often solve the issue with the stuck key.

Key Extraction Tools

If the previous methods don’t work, you may need to resort to using key extraction tools. These specialized tools are designed to safely remove a key without causing damage to your ignition. Some popular key extraction tools include:

• Broken key extractors : These tools are specifically designed to grip and remove broken or stuck keys. They usually have a narrow, hooked tip that can be inserted alongside the key, allowing you to pull it out.
• Pliers : While not specifically designed for this purpose, needle-nose pliers can sometimes be used to grip and carefully remove a stuck key. Be cautious not to apply too much force, as it could cause further damage to the ignition.

Seek the help of a professional locksmith if you’re unfamiliar with using key extraction tools.

Preventive Measures

To avoid your Dodge Journey key getting stuck in the ignition, taking certain preventive measures is important. In this section, we will discuss the following sub-sections: Regular Key Inspection, Proper Key Usage, and Lubrication.

Regular Key Inspection

Inspect your key regularly to detect any signs of wear, bending, or other deformities. If you notice any issues, it’s time to replace the key. Using a damaged key can lead to it becoming stuck in the ignition, or, in worst-case scenarios, breaking off inside the ignition.

Proper Key Usage

To prevent your key from getting stuck, be gentle while inserting and turning the key in the ignition. Avoid applying excessive force when turning the key, as this can cause damage to the ignition cylinder and lead to issues such as the key getting stuck.

Furthermore, be mindful of any debris or foreign objects in the keyhole. If you notice anything obstructing the keyhole, carefully remove the obstruction before inserting your key.

Lubrication

Lubricating the ignition lock cylinder can help keep the key from getting stuck. It is recommended to use a graphite-based lubricant designed specifically for locks.

Apply a small amount of lubricant to your key, insert it into the ignition lock cylinder, and turn it a few times to ensure even distribution. This will help maintain the smooth operation of the ignition system and prevent the key from getting stuck.

Remember to apply the lubricant sparingly and avoid using oil-based or sticky lubricants, as they can attract dirt and cause more issues in the long run.

When to Call a Professional

In some cases, when your Dodge Journey key is stuck in the ignition, it can be resolved with simple troubleshooting. However, there are situations where professional assistance might be necessary. Here are a few scenarios when you should consider calling a professional:

• Worn-out key: If your key is no longer effectively engaging the ignition lock, it might be time to replace it. A professional locksmith can create a new key that fits properly, ensuring smooth operation in the future.
• Faulty ignition lock cylinder: If the issue persists despite having a new or well-maintained key, the problem might lie within the ignition lock cylinder. A skilled locksmith or mechanic can assess the situation and determine if the cylinder needs to be replaced.
• Damaged or misaligned steering column: If the steering column or related components have been damaged or misaligned, this can make it difficult to remove the key. In this case, an experienced mechanic would be best suited to diagnose and address the issue.
• Electrical issues: Modern cars, including the Dodge Journey, have complex electrical systems that could contribute to the problem. If you suspect an electrical issue, such as a malfunctioning key interlock solenoid, it’s best to consult a qualified technician. They can perform necessary diagnostics and repairs to get your vehicle back in working order.

In any of these instances, it’s essential to prioritize safety and avoid attempting repairs beyond your expertise. Hiring a professional can save you time, effort, and potential further damage to your vehicle.

Frequently Asked Questions

How can i remove a stuck key from the ignition in my dodge journey.

First, try to gently turn the steering wheel left and right while attempting to turn the key, as the steering lock might be engaged. If this doesn’t work, ensure that the gear selector is in the Park position. Sometimes, jiggling the key while turning the steering wheel can help as well.

What are the reasons for a key not coming out of the ignition?

Some common reasons for a key getting stuck include a locked steering wheel, the gear selector not being in Park, a worn-out key, a problem with the release button, a bad ignition lock, or a low battery.

How can I fix a key stuck in the ACC position?

Ensure your vehicle is in Park and try turning the key while applying pressure on the brake pedal. If the key remains stuck, try disconnecting the battery for a few minutes and reconnecting it. This might reset the system and allow the key to return to the off position.

What should I do if my key won’t turn in the ignition switch?

First, make sure your vehicle is in Park and that the steering wheel is not locked. If the key still doesn’t turn, try using a spare key, as the original might be worn-out or bent. If the problem persists, you might need to consult a mechanic or replace the ignition switch.

Instore | Mobile Services PA | Online & Mail-In Worldwide

[email protected]

(570) 483-3121

(877) 242-5915

• Login / Register

Mobile Car Key Service

Automotive locksmith.

InstaCarKey provides mobile car key services in Pennsylvania, New Jersey and New York. Our professional mobile locksmith technicians will come out to your location. Get in touch for a free quote or book your appointment online today.

Why we are the right choice? InstaCarKey is not your ordinary locksmith, we specialize only in automotive car keys and use top tier technology. 

We service all make and year Domestic and Foreign vehicles including foreign Mercedes, BMW, Porsche, Maserati and Bentley.

Don’t pay high dealership prices, InstaCarKey will save you 50-80% and we cut or program your key the same day.

All Make and Year Vehicles

Our locksmith Services

Key fob and Smartkey Programming

Transponder Keys

Key Cutting and Duplication

ECU Repair and Programming

Ignition Repair and Programming

All Keys Lost Key Generation

Emergency 24/7 Lockout Service

Do you live in PA, NJ, NY? Ready to schedule service?

Error: Contact form not found.

2018 Primetime Emmy & James Beard Award Winner

R&K Insider

Join our newsletter to get exclusives on where our correspondents travel, what they eat, where they stay. Free to sign up.

A History of Moscow in 13 Dishes

Featured city guides.

Moscow - Vnukovo Airport (VKO) transfer to Moscow - Sheremetyevo Airport (SVO)

Complete the search form to find the best transport prices in moscow - sheremetyevo airport (svo).

Origin not known. Check the value and select between results suggested.

Destination not known. Check the value and select between results suggested.

You should at least select 1 adult passenger.

Additional Luggage?

Children + -

Please indicate child age.

Each passenger may carry one standard piece of luggage and one small item of hand luggage (for example a handbag or laptop). If you have additional or extra large baggage or sporting equipment, select from the options below:

Please insert the date and time of your flight arrival (not take off), as informed by the airline. The driver will take into account luggage collection and immigration formalities.

Please select hours.

Please select mins.

Please insert the date and time the flight takes off, as informed by the airline. The pick-up time will be calculated automatically taking into account journey time and check-in time at airport.

How it works

Our wide selection of carefully selected local companies offer a wide variety of transport options suitable for all budgets from economical shared bus rides to chauffeur services.

Prices includes fixed fares, taxes & gratuity with no hidden costs. You will receive confirmation of your booking via email confirming your trip details.

The day of your trip, your transport will be waiting for you for a simple, stress-free journey to your destination.

Moscow - Vnukovo Airport (VKO) transfer to Moscow - Sheremetyevo Airport (SVO) map

Moscow - vnukovo airport (vko) to moscow - sheremetyevo airport (svo) transfer time.

51 minutes approximately

Moscow - Vnukovo Airport (VKO) to Moscow - Sheremetyevo Airport (SVO) distance

35 Miles approximately

57 Kilometres approximately

This map and route are for information purposes only, with no guarantee of accuracy or completeness. The transport company retains absolute discretion to choose the route to your destination. Distance and travel times are only indicative between origin and destination points.

In and around Moscow - Sheremetyevo Airport (SVO)

• Moscow - Domodedovo Airport (DME)
• Moscow - Sheremetyevo Airport (SVO)
• Moscow - Vnukovo Airport (VKO)

Transport to Moscow - Sheremetyevo Airport (SVO)

• Wheelchair adapted
• Airport transfer
• Private transfer
• Chauffeur service
• Cruise transportation

Fastest way to get from Moscow - Vnukovo Airport (VKO) to Moscow - Sheremetyevo Airport (SVO)

The fastest way to get to Moscow - Sheremetyevo Airport (SVO) will be with a pre-booked taxi or minibus waiting to whisk you off on arrival.

Cheapest way from Moscow - Vnukovo Airport (VKO) to Moscow - Sheremetyevo Airport (SVO)

The most economical way to travel to Moscow - Sheremetyevo Airport (SVO) is by bus. Shared transport options will be more budget friendly as you will be sharing the travel with other passengers.

Save time, save money!

Sign up and we'll send the best deals to you.

Please enter a valid e-mail.

Please keep me updated on special offers and promotions from Shuttle Direct. If you don't love it, just unsubscribe. Read our privacy policy for details.

You should accept terms of service.

• Train Stations
• Travel Guides

Session timed out

Session has timed out, you should fill in the form again and request a new quote.

Ch. 9 The Development of Russia

Ivan i and the rise of moscow, learning objective.

• Outline the key points that helped Moscow become so powerful and how Ivan I accomplished these major victories
• Moscow was considered a small trading outpost under the principality of Vladimir-Suzdal into the 13th century.
• Power struggles and constant raids under the Mongol Empire’s Golden Horde caused once powerful cities, such as Kiev, to struggle financially and culturally.
• Ivan I utilized the relative calm and safety of the northern city of Moscow to entice a larger population and wealth to move there.
• Alliances between Golden Horde leaders and Ivan I saved Moscow from many of the raids and destruction of other centers, like Tver.

A rival city to Moscow that eventually lost favor under the Golden Horde.

Grand Prince of Vladimir

The title given to the ruler of this northern province, where Moscow was situated.

The Rise of Moscow

Moscow was only a small trading outpost in the principality of Vladimir-Suzdal in Kievan Rus’ before the invasion of Mongol forces during the 13th century. However, due to the unstable environment of the Golden Horde, and the deft leadership of Ivan I at a critical time during the 13th century, Moscow became a safe haven of prosperity during his reign. It also became the new seat of power of the Russian Orthodox Church.

Ivan I (also known as Ivan Kalita) was born around 1288 to the Prince of Moscow, Daniil Aleksandrovich. He was born during a time of devastation and upheaval in Rus’. Kiev had been overtaken by the invading Mongol forces in 1240, and most of the Rus’ principalities had been absorbed into the Golden Horde of the Mongol Empire by the time Ivan was born. He ascended to the seat of Prince of Moscow after the death of his father, and then the death of his older brother Yury.

Ivan I. He was born around 1288 and died in either 1340 or 1341, still holding the title of Grand Prince of Vladimir.

Ivan I stepped into a role that had already been expanded by his predecessors. Both his older brother and his father had captured nearby lands, including Kolomna and Mozhaisk. Yury had also made a successful alliance with the Mongol leader Uzbeg Khan and married his sister, securing more power and advantages within the hierarchy of the Golden Horde.

Ivan I continued the family tradition and petitioned the leaders of the Golden Horde to gain the seat of Grand Prince of Vladimir. His other three rivals, all princes of Tver, had previously been granted the title in prior years. However they were all subsequently deprived of the title and all three aspiring princes also eventually ended up murdered. Ivan I, on the other hand, garnered the title from Khan Muhammad Ozbeg in 1328. This new title, which he kept until his death around 1340, meant he could collect taxes from the Russian lands as a ruling prince and position his tiny city as a major player in the Vladimir region.

Moscow’s Rise

During this time of upheaval, the tiny outpost of Moscow had multiple advantages that repositioned this town and set it up for future prosperity under Ivan I. Three major contributing factors helped Ivan I relocate power to this area:

• It was situated in between other major principalities on the east and west so it was often protected from the more devastating invasions.
• This relative safety, compared to Tver and Ryazan, for example, started to bring in tax-paying citizens who wanted a safe place to build a home and earn a livelihood.
• Finally, Moscow was set up perfectly along the trade route from Novgorod to the Volga River, giving it an economic advantage from the start.

Ivan I also spurred on the growth of Moscow by actively recruiting people to move to the region. In addition, he bought the freedom of people who had been captured by the extensive Mongol raids. These recruits further bolstered the population of Moscow. Finally, he focused his attention on establishing peace and routing out thieves and raiding parties in the region, making for a safe and calm metaphorical island in a storm of unsettled political and military upsets.

Kievan Rus’ 1220-1240. This map illustrates the power dynamics at play during the 13th century shortly before Ivan I was born. Sarai, the capital of the Golden Horde, sat to the southeast, while Moscow (not visible on this map) was tucked up in the northern forests of Vladimir-Suzdal.

Ivan I knew that the peace of his region depended upon keeping up an alliance with the Golden Horde, which he did faithfully. Moscow’s increased wealth during this era also allowed him to loan money to neighboring principalities. These regions then became indebted to Moscow, bolstering its political and financial position.

In addition, a few neighboring cities and villages were subsumed into Moscow during the 1320s and 1330s, including Uglich, Belozero, and Galich. These shifts slowly transformed the tiny trading outpost into a bustling city center in the northern forests of what was once Kievan Rus’.

Russian Orthodox Church and The Center of Moscow

Ivan I committed some of Moscow’s new wealth to building a splendid city center and creating an iconic religious setting. He built stone churches in the center of Moscow with his newly gained wealth. Ivan I also tempted one of the most important religious leaders in Rus’, the Orthodox Metropolitan Peter, to the city of Moscow. Before the rule of the Golden Horde the original Russian Orthodox Church was based in Kiev. After years of devastation, Metropolitan Peter transferred the seat of power to Moscow where a new Renaissance of culture was blossoming. This perfectly timed transformation of Moscow coincided with the decades of devastation in Kiev, effectively transferring power to the north once again.

Peter of Moscow and scenes from his life as depicted in a 15th-century icon. This religious leader helped bring cultural power to Moscow by moving the seat of the Russian Orthodox Church there during Ivan I’s reign.

One of the most lasting accomplishments of Ivan I was to petition the Khan based in Sarai to designate his son, who would become Simeon the Proud, as the heir to the title of Grand Prince of Vladimir. This agreement a line of succession that meant the ruling head of Moscow would almost always hold power over the principality of Vladimir, ensuring Moscow held a powerful position for decades to come.

• Boundless World History. Authored by : Boundless. Located at : https://www.boundless.com/world-history/textbooks/boundless-world-history-textbook/ . License : CC BY-SA: Attribution-ShareAlike