Miracle Worker Cruiser

  • VisualEditor

The following Starfleet and Klingon starships are classified as Miracle Worker Cruisers:

Faction Federation

These ships can kitbash pieces from the other Miracle Worker Cruisers of their faction. and can equip Universal Consoles which form the We Are Smart Set .

Scott-class (25th century)

Scott -class (25th century)

Tucker-class (25th century)

Tucker -class (25th century)

Daystrom-class (25th century)

Daystrom -class (25th century)

Mur'Eq-class (25th century)

Mur'Eq -class (25th century)

Klothos-class (25th century)

Klothos -class (25th century)

Antaak-class (25th century)

Antaak -class (25th century)

  • 1 Playable starship
  • 3 Temporal Agent Recruitment

Ex Astris Scientia

The DS9TM Kitbashes

Intrepid-Constitution Variant (USS Elkins) Excelsior Variant (USS Centaur) Excelsior-Constitution Variant (Raging Queen) Excelsior-Constitution Variant (USS Curry) 3-Nacelled Excelsior Variant Constitution Variant Intrepid Variant (USS Yeager) Addendum

Among several well-known starships, the DS9 Technical Manual depicts six side views of nameless ship types with their basic specs. These ships supposedly appeared in the sixth season of DS9, although only three or four of them (plus one which is not depicted in the book) can be identified on screen. Authentic photos of the studio models proved very useful for further analysis and reconstruction of the so-called "Frankenstein Fleet".

General Considerations

star trek online kitbash

"The following spacecrafts were constructed from salvaged components, components in work, and custom assemblies fabricated by the individual fleet yards. Those vessels not destroyed or damaged beyond salvageability were returned to Starfleet bases and yards for rework back to their respective major classes or repaired and returned to service."

This statement, together with the fact that some of the ships combine components from considerably different vessels, suggests that Starfleet does "kitbashing" just like a modeler who slaps together parts from different kits. It should be obvious that real starship components are not designed to be cut off somewhere and welded together in a new configuration. Much less would we expect that for vessels whose designs are a century apart. To make things worse, some of the components are not in scale with each other for the simple reason that the AMT or Monogram model kits come in different scales . Both problems together may require us to disregard the exact appearance of the models. Considering that they were obviously cemented together and painted very quickly, the lack of essential details may allow us to re-interpret their configurations.

Intrepid-Constitution Variant (USS Elkins)

This model is composed of a saucer hull from the Monogram Voyager kit, two pylons of an AMT runabout model, warp nacelles from the AMT Enterprise (-A) and, as weird as it may seem, an almost complete fuselage of a 1/32 scale Monogram F-14 Tomcat model with its twin exhaust. The F-14 part is mounted backward, so the exhausts are facing forward, acting as the ship's deflectors. Since the cockpit is a separate part in the Monogram model kit anyway, it was not necessary to cut through the hull, and so there is no hole in the starship's stern.

star trek online kitbash

The model is labeled "USS Elkins NCC-74121". The name Elkins comes from Judy Elkins, VFX coordinator on DS9 and animator for "Star Trek II".

star trek online kitbash

DS9TM depiction

Until we received the first model pictures, it seemed very likely that the image in the DS9TM was just inaccurate and was actually supposed to depict the Voyager study model built by Rick Sternbach , which has the same overall structure with a pointed saucer, Danube-class nacelle struts and angular nacelles. It is possible that the actual model was inspired from it. Anyway, the DS9TM image correctly reproduces the overall look of the model. It only comes with some slight inaccuracies, which we have corrected. Most obviously the two F-14 engines were not long enough, and the nacelles from the Enterprise (-A) kit were too large relative to the Voyager kit parts in the DS9TM illustration.

star trek online kitbash

Screen evidence

It is not certain, but the Elkins may be visible in the opening scene of DS9: "A Time to Stand" as a background ship on the top left edge of the screen.

star trek online kitbash

In-universe considerations

Not only does this ship look awkward, its structure is also hard to explain. The saucer being the most obvious component, I call this ship just "Intrepid variant" in my ship list. First of all, we have to deny any connection to the F-14 fighter, and I suggest the same regarding the Danube pylons. Since the pylons are a quite simple shape, they may look similar at a larger size, but they are certainly not derived from the ones on the tiny Danube class. The Constitution nacelles are an issue because they simply don't fit on a ship with an Intrepid saucer. If anything, we would expect components of ships of the same era to work well together, but the technologies of the two classes are more than 100 years apart. Moreover, the nacelles would be too large, as the AMT Enterprise(-A) kit comes at a larger scale than the Monogram Voyager. If we don't examine the model too closely, we could postulate that the scale is correct, though. Nevertheless, considering that the finish of the model is anything but convincing and that it is hardly recognizable on screen, we may disregard the exact look of the nacelles and assume that they are not taken from a Constitution (or Miranda). This would also save us the unpleasant scaling issue, as the yet unknown nacelles could be exactly as large as they appear.

Since the saucer is quite obviously the same as on the Intrepid class and the rest of the components are indefinite, the Elkins must be 360m long. There is no reason why 444.39m as stated in the DS9TM should be correct.

Excelsior Variant (USS Centaur)

The Centaur is composed of a modified Excelsior saucer, a complete Miranda photon torpedo launcher assembly, whose "wings" serve as the nacelle pylons, and of four bottom halves of Excelsior nacelles glued together to two new nacelles. The supports where the pylons meet the nacelles on the Excelsior are now facing outward and are painted to serve as the warp field grille. An Excelsior aft shuttlebay is placed in front of the bridge, facing forward. The bridge is taken from an Enterprise-A or Reliant model. Little bits are placed all over the model and painted in copper. The four tubes on the impulse engines are actually the pulse phaser tips of the Miranda that are missing on the launcher assembly. There are many windows in bright green on the saucer top. Like the warp field grille too, they are fluorescent under UV light, which allows to create the impression that they are illuminated from inside. For this purpose the visible light composite (one pass for the foreground, one pass for the background) is combined with a third pass under UV illumination. The fluorescence may be digitally colored white (for the windows) and blue (for the warp field grille).

star trek online kitbash

The ship is labeled "USS Buckner NCC-42043", after Adam Buckner who built this model. But the name is never remotely readable on screen, and would be overruled by the explicitly mentioned name "Centaur" (at least regarding the appearance in "A Time to Stand").

star trek online kitbash

The image in the DS9TM is very inaccurate, as the depicted nacelles are simply complete Excelsior nacelles turned by 90 degrees, with the top facing outside. Neither the Miranda weapons pod nor the large bridge and shuttlebay nor any of the countless bits affixed to the hull were taken into account.

star trek online kitbash

The Centaur was prominently shown as the ship that faced Sisko's stolen Jem'Hadar fighter on its undercover mission in DS9: "A Time to Stand". It later appeared in DS9: "Behind the Lines" at the starbase.

star trek online kitbash

We may postulate that, if anything, the saucer of the in-universe ship is the same size as on the Excelsior. In this case, however, we have trouble to explain why the bridge is so large (as it is actually taken from a model kit of a much larger scale). If the saucer were the same size as that of the Excelsior, this would give us a length of about 380m. Whoever conceived the specs for the DS9TM had the same idea, as the ship is listed as being 381.87m long there. The Excelsior is erroneously scaled up elsewhere in the book, but maybe the length of the Centaur was provided by someone who used the correct length of 467m for the Excelsior. The CG model reconstructed for Star Trek: The Magazine is not really authentic as it is missing many of the add-ons but includes typical Excelsior details that are not on the Centaur. Anyway, it confirms the idea of an Excelsior-sized Centaur.

The designer's original intent, on the other hand, supports a much smaller in-universe size of the Centaur:

Adam Buckner: "I built it for the beginning of Season 6 on DS9 as a BG ship for my episodes around the space station where the detailing and scaling would be less noticeable as being completely mixed, but when Gary Hutzel saw it, he wanted it for his Episode with the JH Bug. I added more detail at this point to make sure the scale looked like a smaller ship even tho' it was an Excelsior dish."

It is true that, with all its modifications, the saucer is indeed hardly recognizable as one of the Excelsior. Considering that there is a Miranda bridge and a complete Miranda rollbar, even with the phaser cannons, these components may have actually been taken from this class. The nacelles (of the in-universe ship) do not have to be the same as on the Excelsior anyway, although they have similar overall proportions. I wouldn't expect that Starfleet turned Excelsior nacelles by 90 degrees such that the reinforcement on the bottom accidentally becomes the warp field grille. The only things that don't quite fit into this image are the many (bright green) windows on the saucer that are spread throughout the whole surface and which wouldn't make much sense if they appeared in the ceiling over quarters and corridors at random. On the other hand, the windows would not correspond to a possible deck layout on a larger Excelsior saucer either.

Adam Buckner agrees with scaling the ship to the Miranda components, and we obtain a length of only 210m - considerably smaller than a Miranda.

star trek online kitbash

More recently, the Eaglemoss Official Starships Collection released a model of the Centaur. The cover of the magazine and the book Shipyards: Starfleet 2294 - the Future give the length as 210m. The CGI used by Eaglemoss in both publications looks identical to the one already known from Star Trek: The Magazine . But I noticed something odd: The saucer is scaled up relative to the nacelles. Actually, this was already the case on the ST Magazine CGI, whose side doesn't seem to be perfectly orthographic. Anyway, this scaling of the parts doesn't comply with the look of Buckner's model (as there was nothing like "a slightly larger Excelsior kit").

star trek online kitbash

Excelsior-Constitution Variant (Raging Queen)

The Raging Queen consists of an AMT Excelsior saucer, which is mounted in a recessed position onto an Excelsior engineering hull. The two seem to be connected only by some sort of inverted ramp in the rear half of the saucer. The shuttlebay has been moved from the stern to the bow. The nacelles are taken from an AMT Constitution or Miranda (more likely from the Miranda) and are much too large owing to that model's larger scale. They are turned by 90 degrees, with the bottom now facing outside. The nacelles are connected to the saucer center with one pair of pylons affixed to the saucer bottom and one ribbed pair of "auxiliary pylons".

The Raging Queen looks similar as the USS Curry discussed below. Still, it has to be a different model. The damage pattern on the Raging Queen's saucer is about the same as on the Curry, but the latter seems to have a still complete impulse engine when it appears in DS9: "A Time to Stand".

star trek online kitbash

The ship is labeled "Raging Queen NCC-42284", supposedly from a Saturday Night Live skit where "Raging Queen" was the name of a pirate vessel ( transcript here ). It is odd that the prefix "USS" is missing. On the other hand, it should be obvious that a ship with an NCC registry should be of Starfleet.

We previously only knew about the similar looking supposed USS Curry from "A Time to Stand" and thought that the DS9TM showed a very inaccurate depiction of that ship. Now, with the knowledge of the studio model photos of the Raging Queen, it appears to be half-way correct. The bow shuttlebay and the corrugated pylons are missing though, and it gives the impression that the saucer is not connected to the engineering hull at all. Also, the bottom of the Constitution refit nacelles, not the top, should face outside. Our reconstruction also takes into account the exact relative scales of the model parts that were used. The Constitution refit nacelles of the AMT/Ertl model measure 28.4cm and the Excelsior saucer 19.8cm.

star trek online kitbash

The Raging Queen appears in the opening scene of DS9: "A Time to Stand", albeit not as prominently as the Curry.

star trek online kitbash

The Raging Queen uses many clearly recognizable Excelsior parts, so it seems as if a ship of this class had been ripped apart and put together in a different fashion. To make things worse, the nacelles are much too large. It would be just to silly to claim that fleet yard engineers took the general plans of the 100-year-old Constitution/Miranda nacelles and inflated them. Even if we imagined that the nacelles wouldn't look like they were taken from the Constitution, they would still be considerably oversized relative to the rest of the ship. The flimsy nacelle pylons and the thin connection between saucer and engineering hull add to the unrealistic appearance of the ship. If we disregard the familiar Excelsior components, we may postulate that the nacelles are actually of the Constitution type. This would render the rest of the ship smaller and maybe a bit more credible.

Considering the thin connection between saucer and engineering hull, it is possible that the saucer and warp nacelles form a fully operational starship, whereas the bottom hull possibly serves as a large cargo- or shuttlebay and is supposed to be abandoned in emergency situations. On the other hand, the huge nacelles would be even more oversized relative to just the saucer.

Under the assumption that the saucer and engineering hull are the same size as on the Excelsior in-universe, we get a length of 310m, if we use the corrected schematic. The DS9TM lists 383.41m for this ship, probably with the same size reference. The error in the book seems to come about for two reasons:

  • In the same book the Excelsior refit is scaled up to 511m. The Excelsior without the tail fin would be about 509m instead of 467m in this case. This increases the Raging Queen by a factor of 1.09.
  • The ratio of the nacelle length to the saucer length is 1.55 in the DS9TM depiction. In reality, the Constitution refit nacelles (28.4cm) and the Excelsior saucer (19.8cm) of the model have a ratio of only 1.43. The too long nacelle accounts for an additional error in the length given in the DS9TM .

The second, perhaps equally valid scaling option is to use the Constitution/Miranda nacelle as a reference. Now we obtain a length of only 174m.

Excelsior-Constitution Variant (USS Curry)

The Curry has a similar overall structure as the Raging Queen . The most significant difference is that the Curry's nacelles have the same orientation as on the Constitution and Miranda. They are affixed to the saucer with standard Miranda pylons. As discussed above, the Curry is a distinct miniature, whose photos were provided by Dan Curry, who built the model.

star trek online kitbash

The name is legible on the model and acknowledges Dan Curry, visual effects supervisor. The registry is NCC-42254.

Only the Raging Queen (albeit without the name) is depicted in the DS9TM . There is no image of the Curry. Whoever made this section of the book may have thought they are the same ship class, or just didn't have a photo of it.

star trek online kitbash

The Curry can be clearly identified in the opening sequence of DS9: "A Time to Stand", although the name is not readable here.

Everything said about the scaling of the Raging Queen applies to the Curry likewise. If the saucer and engineering hull are the same size as on the Excelsior and the nacelles are oversized, it is 310m long; if we scale the ship to the nacelle, we obtain a length of only 168m.

In my ship list, I suggest that the nacelles are actually those of the Constitution or Miranda, which would drastically reduce the size of the nacelles relative to the rest and make the ship look half-way reasonable .

3-Nacelled Excelsior Variant

The three-nacelled Excelsior variant is composed of an AMT Enterprise-B saucer top and an Excelsior saucer top, both with their rims, which are glued against each other to one saucer. There are three nacelles, of which two are affixed to a usual Excelsior pylon assembly, while the single nacelle is mounted to a double pylon taken from an AMT Enterprise (-A) kit. This pylon is split into its two halves, which are fixed on either side of the saucer center. It seems that the double nacelles are on the top, although, owing to the symmetry of the saucer, the correct orientation may be upside down as well (the hole in the assumed saucer top may serve to hold the ship during the filming).

star trek online kitbash

The model bears no visible name or registry. Doug Drexler says the ship was informally named "USS Hutzel", for Gary Hutzel, visual effects supervisor.

The DS9TM image may be upside down, although the orientation is not entirely certain. In any case, the image in inaccurate in that it doesn't show that the two saucers have both retained their rims (of which one is painted in copper) and that a "bump", just like on the normal Excelsior too, holds the double nacelle pylon. Also, the relative scaling of the nacelles and saucer had to be corrected.

star trek online kitbash

There is (fortunately!) no screen evidence of this extremely ugly ship.

If the three-nacelled ship really exists, it has to be an Excelsior variant, as little sense this would make. The nacelles and the two saucer halves are just too obvious. It is also clear that the pylon for the single nacelle may not stem from the Constitution. Not only would it be incompatible and scaled up considerably, it would be even stranger if it existed in a forked variant. Therefore the similarity must be a coincidence.

star trek online kitbash

Taking into account the Excelsior components, we obtain a length of 380m. It is a mystery where the 288.33m in the DS9TM may come from. As the given width of the ship seems to be correct at 173.98m, maybe the first digit of the length figure is just a typo.

Constitution Variant

The Constitution variant consists of parts taken from an AMT Enterprise(-A) kit. The saucer and neck are unchanged, and the nacelles are attached to the lower end of the neck on two short pylons.

star trek online kitbash

The model has no registry but was named "USS Jupp" according to Doug Drexler.

The DS9TM image correctly reproduces the model's look.

star trek online kitbash

There is no screen evidence of this ship.

The overall structure of the Constitution variant is more consistent than of the other kitbash ships. The only problem is why, decades after the Constitution has seemingly been decommissioned, there is still an obscure variant in service. On the other hand, Starfleet still has countless Miranda-class vessels with a very similar structure, so maybe there is also room for this rather "exotic" variant. The DS9TM wants to make us believe that the ship has been constructed from salvaged Constitution parts, but if anything, it is not a 1/1 scale "kitbash", but a class of its own.

star trek online kitbash

Taking into account the used Constitution components, we obtain a length of 235m. The 364.84m figure in the DS9TM is much too long, even if we take into account the Excelsior scaling error.

Intrepid Variant (USS Yeager)

The model of the USS Yeager combines an Intrepid saucer hull from the Monogram Voyager with an almost complete Monogram model of Chakotay's Maquis raider. The nacelles are taken from the Voyager model and simply affixed to the wings of the Maquis raider.

star trek online kitbash

The model is named "USS Yeager NCC-65674". Unluckily, at the about the same time, a ship of the Saber class was named after Chuck Yeager too.

The DS9TM image overall correctly reproduces the model's look with some smaller inaccuracies. Most notably the nacelles should not be straight but tilted.

star trek online kitbash

The Yeager appears in stock footage in which the ship can be seen as part of the Ninth Fleet behind the station. The same shot is reused in as many as eighteen DS9 episodes of the sixth and seventh seasons.

star trek online kitbash

The Yeager is the most blatant attempt ever to combine scaled parts in a ship design. Since the Intrepid saucer is the more prominent component, we have to ignore the Maquis raider hull. The excuse that fleet yard engineers may have taken a Maquis raider hull and simply inflated its dimensions is stupid, and it is laughable that they should have constructed this hull for a salvaged Intrepid saucer. The engineering must be some custom-made hull, maybe for a testbed for variable warp field geometry or for a limited number of ships of a yet unknown class. The use of an Intrepid saucer, which looks like anything else but a modular component, still aggravates the problem.

Taking into account the used Intrepid components, we obtain a length of 346m. The figure of 402.11m, as in the DS9TM , is definitely too long.

Adam Buckner built more kitbashes for DS9. Among them is a model labeled as "USS Antares NCC-9844". It is a modification of the AMT USS Reliant kit and appears on screen in DS9: "Favor the Bold". The model was built to be filmed from below, hence the hole in the bridge for the rod that would hold the ship during the filming. The pod is made from the stand of an AMT Excelsior kit.

While it complicates the issue of way too many ships named "Antares (class)" , this could be easily the class ship of Starfleet's 24th century Antares class.

star trek online kitbash

Four ships of this type showed up at Starbase 375 in DS9: "Favor the Bold", along with standard Miranda-class ships that were also built from AMT model kits.

star trek online kitbash

Also among Buckner's designs is a ship called USS Bradford. It consists of a Miranda saucer, with two Intrepid pylons and two nacelles on top and two Saturn V rockets as cargo pods. The model is not labeled. According to Adam Buckner, the Bradford was sitting on producer Peter Lauritson's desk and neither made it to the screen nor into the DS9TM .

star trek online kitbash

Adam Buckner: "As you can see, it's a cargo variant for carrying substantial loads. I always imagined the rest of the main hull being converted to traditional cargo bays as well. Large doors and transporter arrays for loading cargo. Not much on the personnel side."

Another model built for DS9 is the USS Trieste. The ship consists of a Miranda-class main hull, two Galaxy-class nacelles mounted on top and several add-ons, among which two large phaser (or sensor?) domes are the most notable ones. The registry is NCC-3724, missing one digit from the NCC-37124 as it appeared on the Starfleet Operations chart from TNG. The model likely never appeared on screen.

star trek online kitbash

We have analyzed the photos of the DS9TM ships and have made the necessary adjustments to the diagrams. Of the seven ships discussed above the following may be identified on screen:

  • Elkins (possibly)
  • Raging Queen
  • Curry (not in the book)

Maybe we don't even want to see crazy constructions like the three-nacelled Excelsior variant on screen. By any means, the kitbash models, while creative, have such a poor finish that we may have to supplement missing details in mind, and which may allow us to see different, more reasonable designs in them.

Starship Kitbashing - about the feasibility of combining components of different ship types

Book Reviews - including the DS9TM

Starship Gallery - Wolf 359 & DS9TM Starfleet Vessels

I am grateful to Mark Delgado who managed to dig up the photos and some additional information. Thanks a lot to the unknown contributor who made the photos! Special thanks to Doug Drexler and Adam Buckner. Thanks also to Alexander Hartmann , AndrewR, Captain Mike, Chris Spinnler, Dax, Dukhat, E.Jakobsson, Greg Tyler, J.L.Garner, Jeffrey Griffin, Jörg Hillebrand, Kris Olinger, Masaki Taniko , NeghVar, Peregrinus, Timo, The_Tom and many more people at Flare where the photos have been discussed.

star trek online kitbash

https://www.ex-astris-scientia.org/articles/ds9tm.htm

Last modified: 29 Mar 2024

star trek online kitbash

© Ex Astris Scientia 1998-2024, Legal Terms

This website is not endorsed, sponsored or affiliated with CBS Studios Inc. or the Star Trek franchise.

Fleet Yards

10 Legendary Star Trek Kit-Bashes

1. centaur-class.

Star Trek USS Yeager

The Centaur-class went from being a quick ship invented for necessity to becoming one of the most popular kitbash ships of them all. Adam Buckner designed the ship using existing Excelsior and Miranda-class pieces. However, why he designed the ship is one of the most unique stories on this list.

Buckner had been working under Gary Hutzell, who had encouraged him to use some of the downtime between seasons five and six of Deep Space Nine to build some models, ostensibly with a view to practicing motion control. During this time, Buckner was traveling and met a young boy named Guillermo while in Spain. After explaining his job, Buckner promised to build the boy a model.

Flash forward to A Time To Stand , and the script called for the USS Centaur. Buckner put together the ship using the Excelsior saucer, with the Reliant bridge module. The nacelles came from the Excelsior, while the Reliant's roll-bar served as the nacelle struts. The model was so small that they didn't bother installing any lighting, instead opting to attach UV strips to the nacelles. These were later digitally altered to appear blue.

The ship appeared briefly, moving quickly, as the team decided it would be designed as a 'deep intruder', which effectively meant it was designed for speed and recon, not battle. Once the episode wrapped, Buckner kept the filming model, but then built another one, so that he could keep his promise to Guillermo.

That could have been the end of the story, but the ship once again saw a return in both Star Trek: Prodigy and the video game Star Trek: Resurgence .

Writer. Reader. Host. I'm Seán, I live in Ireland and I'm the poster child for dangerous obsessions with Star Trek. Check me out on Twitter @seanferrick

  • PlayStation 3
  • PlayStation 4
  • PlayStation 5
  • Xbox Series
  • More Systems
  • What's your favorite kitbash?
  • Topic Archived
  • Page 1 of 3

More Topics from this Board

  • Prodigy Season two discussion (Spoilers) 8 posts, 7/2 7:03PM
  • Would it be possible to use the transporters to... 10 posts, 6/26 5:41PM
  • I'm a bit confused on how "fast" max warp is. 20 posts, 6/25 2:37PM
  • Just seen Star Trek III: The Search For Spock in the cinema 6 posts, 6/20 10:28AM
  • Would you trust a simple tailor? 23 posts, 6/18 9:42PM

The Trek BBS

  • Search forums

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

  • Star Trek Fandom

Has anyone tried making their own kitbash models?

  • Thread starter t_smitts
  • Start date Sep 17, 2015

Fleet Captain

  • Sep 17, 2015

Mysterion

Vice Admiral

You really need to check Forbin 's page: http://www.inpayne.com/models/kitbash/trekpage.html  

Rattrap

Mysterion beat me to it. Corbin really is one of the undisputed Trek Kitbash Masters.  

Q2UnME

Mysterion said: You really need to check Forbin 's page: http://www.inpayne.com/models/kitbash/trekpage.html Click to expand...

Ar-Pharazon

Ar-Pharazon

  • Sep 18, 2015

Forbin is my personal hero. I've done a couple kitbashes, but don't have anywhere near his talent or patience. You definitely need patience, and practice, but you can get some great results.  

Feyman's shipyard has also got some cool stuff. http://www.webring.org/l/rd?ring=startrekscalemod;id=5;url=http://www.feymanshipyards.com/  

137th Gebirg

137th Gebirg

I humbly bow to Forbin 's kit bash mastery, without a doubt, but I have done a few of my own over the years as well. I think the Asteroth and Richthofen are my favorites. Please forgive the "90's look" of the pages. That's when I built them and I never really had the time to go back and fix them up.  

^ Nice work there too. Your Phoenix has the later style of Nebula pod though, rather than that EWACS thing at did in the episode. I did the regular pod too. Romulan BOP USS Nebula  

  • Sep 20, 2015
E-DUB said: Feyman's shipyard has also got some cool stuff. http://www.webring.org/l/rd?ring=startrekscalemod;id=5;url=http://www.feymanshipyards.com/ Click to expand...
  • Sep 21, 2015
Ar-Pharazon said: ^ Nice work there too. Your Phoenix has the later style of Nebula pod though, rather than that EWACS thing at did in the episode. I did the regular pod too. Romulan BOP USS Nebula Click to expand...

Kaiser

Rear Admiral

Similar threads.

David cgc

  • Jan 17, 2024

ashleytinger

  • Mar 17, 2024

Laura Cynthia Chambers

  • Apr 2, 2024
  • Jan 18, 2024

Cyfa

  • Feb 18, 2024

Sign up / Register

  • General Trek Discussion
  • Star Trek: Enterprise
  • Star Trek - The Original & Animated Series
  • Star Trek: The Next Generation
  • Star Trek: Deep Space Nine
  • Star Trek: Voyager
  • Star Trek: Discovery
  • Star Trek: Picard
  • Star Trek: Strange New Worlds
  • Star Trek: Lower Decks
  • Star Trek: Prodigy
  • Star Trek Movies I-X
  • Star Trek Movies: Kelvin Universe
  • Future of Trek
  • Trek Gaming
  • Trek Literature
  • Fan Fiction
  • Fan Productions
  • CSI (at Talk CSI)
  • Science and Technology
  • Sports and Fitness
  • Web Sites/Design
  • Miscellaneous
  • Site Forums

IMAGES

  1. Star Trek Online

    star trek online kitbash

  2. Star Trek Online

    star trek online kitbash

  3. Star Trek Online

    star trek online kitbash

  4. Centaur-class kitbash in Star Trek Online : r/StarTrekStarships

    star trek online kitbash

  5. Vesta-class kitbash [Star Trek Online] : StarshipPorn

    star trek online kitbash

  6. Kitbashed Light Cruiser : r/sto

    star trek online kitbash

VIDEO

  1. How to Play STO: How To Fill Fleet DOFFs #startrek #startrekonline #tutorial

  2. STO Knowledge is Power Playthrough

  3. Star Trek Online

  4. SMASH or PASS: Community Kitbash Ships

  5. How to Play STO: How Fleets Work

  6. Star Trek Concept Warbird -kitbash

COMMENTS

  1. Kitbashed Starships

    Circa Late Star Trek: Deep Space Nine: Light Corvette: Post Star Trek: Voyager: Cruiser: KLINGON AND ROMULAN SHIPS: Before Star Trek (the original series) Battlecruiser; ... My Kitbash Calendar Archive available for downloading. to Eric Longstreet's album of photos of my kitbashes, photographed at HiWay Hobby House's Sci Fi Weekends. ...

  2. Ex Astris Scientia

    Starship Kitbashing. In order to maintain a certain credibility of the fictional technology in Star Trek, starship design should not be entirely arbitrary, as outlined in the starship design guidelines. Among the many ways to design a new starship, taking available components and reassembling them in a different fashion is popular in fandom as ...

  3. Star Trek Online

    Fresh Out Of Spacedock | Season 5 | Episode 12Please Subscribe!So as you know, the Inquiry Class ship from the final episode of Star Trek Picard was brought ...

  4. Star Trek Online

    Star Trek Online has released the new T6 Multi-Mission Explorer pack. Vesta is still Besta! This video shows all the new ship visuals and does a complete kit...

  5. Kitbashing is fun! : r/sto

    Hijacking your thread, because I made a weird Kitbash myself yesterday night with the reliant class: ... This is the unofficial community subreddit for Star Trek Online, the licensed Star Trek MMO, available on PC, Playstation, and Xbox. Share your glorious (or hilarious) in-game adventures through stories and screencaps, ask your game related ...

  6. Star Trek Online

    Star Trek Online has released the new T6 Miracle Worker Cruiser mega bundle. This video shows all the new ship visuals and does a complete kitbash of all shi...

  7. Centaur-class kitbash in Star Trek Online : r/StarTrekStarships

    Best kitbash in my opinion. I posted the same set up awhile back and someone pointed out it looks just like the Lexington Class from Klingon Academy. ... This is the unofficial community subreddit for Star Trek Online, the licensed Star Trek MMO, available on PC, Playstation, and Xbox. Share your glorious (or hilarious) in-game adventures ...

  8. My first ever Star Trek Kitbash! : r/sto

    This is the unofficial community subreddit for Star Trek Online, the licensed Star Trek MMO, available on PC, Playstation, and Xbox. Share your glorious (or hilarious) in-game adventures through stories and screencaps, ask your game related questions, and organize events with your fellow Captains.

  9. What is your favorite Odyssey kitbash?

    February 2016. My in-character pitch for the Sky Road is that it's a refit to the T5-U ship after a catastrophic structural integrity failure involving the secondary hull and the starboard nacelle pylon. To that end, I went with original Odyssey nacelles and saucer, with Sojourner secondary hull and pylons.

  10. Miracle Worker Cruiser

    Miracle Worker Cruiser. The following Starfleet and Klingon starships are classified as Miracle Worker Cruisers: These ships can kitbash pieces from the other Miracle Worker Cruisers of their faction. and can equip Universal Consoles which form the We Are Smart Set . Community content is available under CC BY-NC-SA unless otherwise noted.

  11. Ex Astris Scientia

    More recently, the Eaglemoss Official Starships Collection released a model of the Centaur. The cover of the magazine and the book Shipyards: Starfleet 2294 - the Future give the length as 210m. The CGI used by Eaglemoss in both publications looks identical to the one already known from Star Trek: The Magazine.But I noticed something odd: The saucer is scaled up relative to the nacelles.

  12. Star Trek Online

    #StarTrekOnline #STO #StarTrekThe Miranda-class probably has some of the most parts and materials in the game that can be used to create a truly unique look....

  13. Steam Workshop::Star Trek Interior Kitbash Kit

    Star Trek Interior Kitbash Kit. Subscribe. Subscribed. Unsubscribe. In 1 collection by Fleodanj. Fleodanj's Star Trek ships. 11 items. Description [Modless] Interior Rooms Kitbash Kit . If you're as happy as I am doing interiors, this should help at least a bit ! ...

  14. I made a Kitbash in Star Trek Online! : r/StarTrekStarships

    23K subscribers in the StarTrekStarships community. A subreddit for lovers of Star Trek starships. Anything related to the ships of Star Trek…

  15. 10 Legendary Star Trek Kit-Bashes

    It is also the only kitbash model that was seen in both the Best Of Both Worlds Part 2 and Emissary, as it can be seen from the rear window of Sisko's escape pod, right before the Saratoga explodes.

  16. 10 Legendary Star Trek Kit-Bashes

    10 Legendary Star Trek Kit-Bashes. 1. Centaur-class. The Centaur-class went from being a quick ship invented for necessity to becoming one of the most popular kitbash ships of them all. Adam ...

  17. SMASH or PASS: Community Kitbash Ships

    Happy April Fool's Day! No pranks this year, just your kitbashed ships! What did you guys send me!?_____...

  18. What's your favorite kitbash?

    What I like about this kitbash is that it actually looks like a ship Starfleet would have built, and not just some ugly slap-job. It's very similar to the more famous Galaxy-class but smaller with various modifications to make it stand out, notably the three sensor pods.

  19. Has anyone tried making their own kitbash models?

    Considering that a number of the "kitbashes" we on in Star Trek were made with off-the-shelf model kits, I wonder if any fans have tried creating some new designs with such parts. ... Quite possibly the "Kitbash King" of this board and many, many more. Forbin does outstanding work; his attention to detail is outstanding. Q2UnME, Sep 17, 2015 #4.

  20. Centaur-class kitbash in Star Trek Online : r/spaceships

    A subreddit for the Star Wars Legion Miniatures game. Be RESPECTFUL, be helpful, be supportive - these are the things that make our hobby great and enable its continued growth. Members Online

  21. Avenger/Arbiter/Inquiry Kitbash (ShadowStar Docks) Star Trek Online

    done doe fun I hope you like XD If you enjoy our the Videos and want to Support Us, please check out the links below, For Live Streams, Twitch - https://www....

  22. Kitbashing

    Hobbyists may kitbash to create a model of a subject (real or imaginary) for which there is not a commercial kit. Although it has a long history, kitbashing came to the attention of a wider public via the fine modelwork seen in TV series such as Thunderbirds, Star Trek and the films 2001: A Space Odyssey and Star Wars Episode IV: A New Hope ...

  23. Here's another Star Trek kitbash. Not as proud of this kitbash as my

    This is the unofficial community subreddit for Star Trek Online, the licensed Star Trek MMO, available on PC, Playstation, and Xbox. Share your glorious (or hilarious) in-game adventures through stories and screencaps, ask your game related questions, and organize events with your fellow Captains.

  24. Starfleet's WEIRDEST Ships

    With tight budgets, and only a tiny number of Hero ship models, the designers of Trek had to get creative to flesh out the fleets of Starfleet, turning to th...